cq9电子大奖

CN

Product Name Category Characteristic & Application CDMF status
PEG 300 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 400 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 540 Blend
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 600 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 1000 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 1450 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 3350 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
PEG 4000 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
PEG 4600 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
-
PEG 8000 NF
Widely used for oral (tablets, capsules, etc.) and external use (ointment base, suppositories, etc.).
PVC/PVDC
PVC: 120-600μm PVdC: 25-180g/m2
Provide mid-to-high barrier to moisture, oxygen and aroma. A cost-effective solution for most hygroscopic and oxygen-sensitive pharmaceuticals
PVC
PVC: 60-600μm
Ideal for blister packaging that requires low moisture barrier. These rigid films provide superior clarity, good chemical resistance, excellent thermoformability and good dimensional stability.
PVC/Aclar
PVC: 120-400μm Aclar: 15-152μm
Crystal clear, biochemically inert, thermally stable with unsurpassed protection against moisture in formulations designed to significantly improve performance and productivity.
PVC/Aclar/PVC
PVC: 60-200μm(one-layer PVC) Aclar: 15-152μm
Crystal clear, biochemically inert, thermally stable with unsurpassed protection against moisture in formulations designed to significantly improve performance and productivity.
PVC/PE/PVDC
PVC: 200-400μm PE: 25-30μm PVdC: 40-180g/m2
Provide mid-to-high barrier to moisture, oxygen and aroma. A cost-effective solution for most hygroscopic and oxygen-sensitive pharmaceuticals
Apifil
topical
A nonionic oil-in-water emulsifier for topical emulsions.
-
Capryol 90
oral & topical
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Cosurfactant in LFCS Type II (SEDDS) and Type III (SMEDDS) formulations. Solubilizer and cosurfactant for microemulsion in topical formulation.
-
Capryol PGMC
oral & topical
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Cosurfactant in LFCS Type II (SEDDS) and Type III (SMEDDS) formulations. Solubilizer and cosurfactant for microemulsion in topical formulation.
-
Cetyl Palmitate
topical
Thickener.
Compritol 888 ATO
oral
Modified release matrix former for tablet. Lubricant for tablet—independent of mixing time and speed. Lipid carrier former for solid lipid nanoparticle (SLN) and nanostructured lipid carrier (NLC). Coating agent for taste masking and protection of sensitive APIs. Listed in the European STEP database for excipients in pediatric medicines.
Compritol HD5 ATO
oral
Lubricant and wetting agent in fast-dissolving and effervescent tablets.
-
Geleol Mono and Diglycerides NF
oral & topical
Modified release matrix former for capsule. Coating agent for taste masking. Consistency agent.
Gelot 64
topical
Emulsifier for difficult-to-formulate APIs, API combinations, anhydrous emulsion. Associate with Emulcire™ 61 WL2659 to enhance sensorial and texture properties.
-
Gelucire 43/01
oral & topical
Matrix-forming agent for protection of APIs sensitive to oxidation, humidity, or light. Consistency agent in oral and topical formulations
-
Gelucire 44/14
oral
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Single excipient formulation system: self-emulsifies in aqueous fluid into microemulsion—LFCS Type III (SMEDDS). Wetting agent. Lipid binder in melt processes.
-
Gelucire 48/16
oral
Solubilizer for low log P APIs and bioavailability enhancer. Single excipient formulation system: self-emulsifies in aqueous fluid into micellar solution—LFCS Type IV. Use in melt processes (granulation, extrusion), granulation, and compression. Wetting agent.
Gelucire 50/13
oral
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Single excipient formulation system: self-emulsifies in aqueous fluid into coarse emulsion—LFCS Type III (SMEDDS). Modulation of drug release. Lipid binder in melt processes.
-
Labrafac Lipophile WL1349
oral & topical
Oily vehicle in LFCS Type I, Type II (SEDDS), and Type III formulations (SMEDDS). Oil phase for topical formulations. Oily vehicle and solubilizer for solutions (parenteral, auricular).
-
Labrafac PG
topical
Oily phase for topical formulations. Oily vehicle and solubilizer for solutions.
Labrafil M1944CS
oral & topical
Solubilizer for poorly-soluble API and bioavailability enhancer Single excipient formulation system: self-emulsifies in aqueous fluid into emulsion – LFCS type II (SEDDS) Combine with Labrasol®ALF or Gelucire® 44/14 for LFCS Type III (SMEDDS) Co-emulsifier in topical formulations often associated with Tefose® 63 in antifungal cream
filing No. available
Labrafil M2125CS
oral
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Single excipient formulation system: self-emulsifies in aqueous fluid into emulsion—LFCS Type II (SEDDS). Combine with Labrasol® ALF or Gelucire® 44/14 for LFCS Type III (SMEDDS).
-
Labrafil M2130CS
topical
Co-emulsifier in topical formulations often associated with Tefose® 63. Solubilizer for poorly-soluble APIs and bioavailability enhancer. Single excipient formulation system: self-emulsifies in aqueous fluid into emulsion—LFCS Type II (SEDDS). Combine with Labrasol® ALF or Gelucire® 44/14 for LFCS Type III (SMEDDS).
Labrasol
topical
Solubilizer and O/W surfactant for microemulsion. Able to form light foams with pump device (no gas required).
Labrasol ALF
oral
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Single excipient formulation system: self-emulsifies in aqueous fluid into microemulsion—LFCS Type III (SMEDDS). High purity guaranteed for stability and capsule compatibility.
Lauroglycol 90
oral & topical
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Cosurfactant in LFCS Type II (SEDDS) and Type III (SMEDDS) formulations. Solubilizer and cosurfactant for microemulsion in topical formulation.
-
Lauroglycol FCC
topical
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Cosurfactant in LFCS Type II (SEDDS) and Type III (SMEDDS) formulations. Solubilizer and cosurfactant for microemulsion in topical formulation.
filing No. available
Maisine CC
oral
Solubilizer for lipophilic API and bioavailability enhancer. Oily vehicle for LFCS Type I (oily), Type II (SEDDS) and Type III (SMEDDS), associated with lymphatic absorption.
Monosteol
topical
Consistency agent for oily phase in topical formulations. Stability-improving agent.
Peceol
oral & topical
Solubilizer for lipophilic APIs and bioavailability enhancer. Oily vehicle containing long-chain fatty acids (C18:2) for LFCS Type I (oily), Type II (SEDDS), and Type III (SMEDDS), associated with lymphatic absorption. Oily vehicle for topical formulations.
Plurol Diisostearique
topical
PEG-free W/O emulsifier for topical formulations Ideal for heat-sensitive API Stabilizes and improves sensorial and texture properties
-
Plurol Oleique CC497
oral & topical
Solubilizer for poorly-soluble APIs and bioavailability enhancer. Cosurfactant in LFCS Type II (SEDDS) and Type III (SMEDDS) formulations. Solubilizer and cosurfactant for microemulsion in topical formulations.
Precirol ATO 5
oral
Coating agent for taste masking. Lubricant and flow aid for capsule filling with powders. Modified release matrix former for tablets.
-
Sedefos 75
topical
Emulsifier for anhydrous topical formulations. Emulsifier for difficult-to-formulate emulsions (solvents and large oily phase). Stabilizes and improves sensorial and texture properties.
-
Suppocire range
rectal & vaginal
Highly versatile and compatible hard fat suppository base with precedence of use with a wide range of APIs.
Tefose 63
topical
Versatile emulsifier for challenging topical formulations. Widely used with antimicrobials (azole family). Frequently used with the co-emulsifier Labrafil® M 1944 CS to improve stability. Delivers sensorial and texture properties.
Tefose 1500
topical
Polyvalent emulsifier compatible with all types of oils and ideal for topical lotions. Stabilizes and improves sensorial and texture properties.
-
Tefose 2000
topical
A nonionic oil-in-water emulsifier for topical emulsions.
Trancutol HP
oral
Solvent and powerful solubilizer. Cosolvent in surfactant oral formulations—LFCS Type III (SMEDDS) and Type IV (micellar solutions). Vehicle in parenteral, nasal, ophthalmic formulations.
Trancutol P
topical
Solvent and powerful solubilizer. Penetration enhancer for topical formulations.
Trancutol V
topical
Solvent and powerful solubilizer. Penetration enhancer for topical formulations. Vehicle in topical, parenteral and auricular formulations.
ARBOCEL® A300
Particle size:320μm
Coarse grade with excellent flow properties used in direct compression and for capsule fillings.
-
ARBOCEL® M80
Particle size:55μm
Fine, fibrous grade, suitable for wet granulation.
-
ARBOCEL® P290
Particle size:75μm
Fine grade with increased density and improved flow. Suitable for wet granulation and direct compression
-
EMCOCEL®50 M
Particle size:65μm
Spray drying type,fine standard MCC grade. Especially suited for wet granulation, roller compaction and spheronization. Very high compactibility.
EMCOCEL®90 M
Particle size:130μm
Spray drying type,medium size standard MCC grade. Suited for the majority of directly compressible actives. Combines good flow and high compactibility.
EMCOCEL®90 M COARSE
Particle size:170/175μm
Spray drying type,scoarse, DC-grade MCC. Suited for the majority of directly compressible actives.
EMCOCEL®HD 90
Particle size:130μm
Spray drying type,same quality to grade 102/90M, but increased bulk density and improved flow properties. Especially suited for high speed tableting and processing high density actives.
-
EMCOCEL®LP 200
Particle size:220μm
Spray drying type,scoarse grade MCC, combines good compactibility and high binding capacity with outstanding flow. Provides good content uniformity at low weight variation – even when used with low concentrations of fine actives.
-
EMCOCEL®XLM 90
Particle size:130μm
Spray drying type,same quality to grades 102/90M, but very low moisture content (< 1.5 %). For processing water-sensitive actives.
-
EMCOMPRESS®
Average Particle Size by Laser Diffraction:190um
Conforms to JP,USP,Ph.Eur. Direct compression grades for flow enhancement in powder mixtures. Direct compression
-
EMCOMPRESS® TCP DC
Average Particle Size by Laser Diffraction:200um
 water-insoluble functional fillers. Specially treated calcium sulfate dihydrate, used as a filler in direct compression
-
EMCOMPRESS® TCP POWDER
Average Particle Size by Laser Diffraction:<50um
 water-insoluble functional fillers. Wet granulation,binders
-
EMCOMPRESS® PREMIUM
Average Particle Size by Laser Diffraction:220um
Conforms to JP,USP,Ph.Eur. High brightness. The content of grayish white particles is low. Direct compression
-
EMCOMPRESS® PREMIUM POWDER
Average Particle Size by Laser Diffraction:<50um
Conforms to JP,USP,Ph.Eur. Small particle size, good fluidity. Wet granulation
-
EMCOMPRESS® ANHYDROUS
Average Particle Size by Laser Diffraction:220um
Conforms to JP,USP,Ph.Eur. Special grades improve compaction and moisture stability in tableting. It is an ideal glidant for capsule fillings. Direct compression
-
EMCOMPRESS® ANHYDROUS POWDER
Average Particle Size by Laser Diffraction:<50um
Conforms to JP,USP,Ph.Eur. Small particle size, good fluidity. Wet granulation
-
EMCOMPRESS® ANHYDROUS COARSE POWDER 60
Average Particle Size by Laser Diffraction:60μm
direct compression
-
EMCOMPRESS® ANHYDROUS DC
Average Particle Size by Laser Diffraction:170μm
direct compression
-
EMCOSOY®
Soy Polysaccharides
Pure natural high-efficiency disintegrant without starch or sugar. Can be used as a dietary fiber for excellent performance in nutritious foods
-
EMDEX®
Dextrates
A directly compressible, 100% water soluble, and lactose-free tablet binder. When used in direct compression, EMDEX® shows superior flow, compaction, and tablet robustness. EMDEX® has a sweet taste, but is not as sweet as sucrose, making it ideal for semi-sweet formulations. EMDEX® was designed for a wide variety of applications including: chewable tablets, ingestible tablets, dispersible tablets, effervescent tablets, and soluble tablets. It is also commonly used in veterinary applications.
EXPLOTAB®
EtOH-based
pH 5.5-7.5,GMO Free,Compendial Type A. Superdisintegrant with a rapid and high degree of swelling for tablet and capsule formulations. Especially for poorly water-soluble actives and tablet matrices with higher pH values.
-
EXPLOTAB® PCF
EtOH-based
pH 5.5-7.5,GMO Free,Compendial Type A. Special grade with max. 0.7 % NaCl recommended for APIs which require a very low ion content.
-
EXPLOTAB® CLV
EtOH-based
pH 5.5-7.5,GMO Free,Compendial Type A. Special grade with increased number of crosslinkings. Especially suited for wet granulation applications.
-
EXPLOTAB® Low pH
EtOH-based
pH 3.0-5.0,GMO Free,Compendial Type B. Special grade with low pH value. Complies with Type B of Ph. Eur, NF, JP.
-
LUBRI-PREZ™
D50: 7.0 μm~11.0μm
Effectively reduces the punch adhesion and die wall friction in tableting.
-
LUBRI-PREZ™
average D50: 13μm
-
LUBRITAB®
Hydrogenated Vegetable Oil
Chemically inert,Elimination of capping and delamination, Nutritional value,Controlled release properties. It is a plant-derived lubricant made from hydrogenated cottonseed oil. It serves as a lubricant in tablet and capsule formulations and is the ideal lubricant for health supplement and nutraceutical products. It can also be used as a binder and in controlled release matrix tablets.
PROSOLV® SMCC 50
Particle size:65μm
Bulk Density 0.25 – 0.37g/mL. Formulas in which optimal compaction and decent flow is required,used for direct compression.
PROSOLV® SMCC 50 LD
Particle size:50μm
Bulk Density 0.25 – 0.30g/mL. Best in class binder,used for direct compression.
-
PROSOLV® SMCC 90
Particle size:125μm
Bulk Density 0.25 – 0.37g/mL. Formulas in which a balance of flow and compaction is required,used for direct compression.
PROSOLV® SMCC 90 LM
Particle size:125μm
Bulk Density 0.27 – 0.39g/mL. Equivalent to quality of PROSOLV® SMCC 90, but with lower moisture content (< 3%),used for direct compression.
-
PROSOLV® SMCC HD 90
Particle size:125μm
Bulk Density 0.38-0.50g/mL. Formulas in which optimal flow and consolidation is required. This grade shows the best disintegration times.  Low moisture grade available on request,used for direct compression.
PROSOLV®EASYtab NUTRA
Microcrystalline Cellulose, Colloidal Silicon Dioxide, Croscarmellose, Palm Kernel Oil saturated, DATEM
Average Particle Size by Laser Diffraction:130um. EASYtab NUTRA exhibits the same advantages as EASYtab SP and is suitable for nutraceutical applications. Active ingredients simply need to be added to EASYtab NUTRA and can be put directly on the tablet press. Simplifies tableting, no need for further excipients.
-
PROSOLV®EASYtab SP
Microcrystalline Cellulose Colloidal Silicon Dioxide, Sodium Starch Glycolate, Sodium Strearyl Fumarate
Average Particle Size by Laser Diffraction:130um,Bulk Density 0.30-0.42g/mL. Ready-to-use excipient composite. Especially suitable for abrasive, bad flowing and fluffy actives formulations. High-speed tabletting, superior weight, and content uniformity, no overmixing, higher yield.
-
PROSOLV®EASYtab SP LM
Microcrystalline Cellulose, Colloidal Silicon Dioxide, Sodium Starch Glycolate, Sodium Strearyl Fumarate
Average Particle Size by Laser Diffraction:130um,Bulk Density 0.30-0.42g/mL. Equal quality to grade EASYtab SP, but lower moisture content (< 3 %).
-
PROSOLV®ODT G2
Microcrystalline Cellulose, Colloidal Silicon Dioxide, Mannitol, Fructose, Crospovidone
Average Particle Size by Laser Diffraction:52um,Bulk Density 0.45 – 0.65g/mL. PROSOLV® ODT G2 is a simple-to-use co-processed composite derived from JRS PHARMA’s patented PROSOLV®Technology. Its primary application is for the development and manufacture of orally disintegrating tablets allowing the discrete and convenient administering of medicines without water for high patient compliance.
PRUV®
High degree of API compatibility,Robustness to over-lubrication. Faster dissolution rates,Harder tablets. It is a high-efficiency lubricant with lower hydrophobicity than magnesium stearate. It can avoid many problems caused by divalent magnesium ions, can significantly reduce the risk of over-lubrication, and minimize the film formation of effervescent tablets.
VIVACOAT® A
High Adhesion. Fully formulated Coating System (powder).Highest quality standards ,Made in Germany . Color guarantee - Free technical support . Pharmaceutical & neutraceutical applications.
VIVACOAT® C
Customer Formulation. Fully formulated Coating System (powder).Highest quality standards ,Made in Germany . Color guarantee - Free technical support . Pharmaceutical & neutraceutical applications.
-
VIVACOAT® M neo
Moisture Barrier. Fully formulated Coating System (powder).Highest quality standards ,Made in Germany . Color guarantee - Free technical support . Pharmaceutical & neutraceutical applications.
-
VIVACOAT® N
Natural components. Fully formulated Coating System (powder).Highest quality standards ,Made in Germany . Color guarantee - Free technical support . Pharmaceutical & neutraceutical applications.
VIVACOAT® X
Extra Elegance. Fully formulated Coating System (powder).Highest quality standards ,Made in Germany . Color guarantee - Free technical support . Pharmaceutical & neutraceutical applications.
-
VIVAPHARM® ALIGINATES
Sodium Alginate
Gelling and thickening agent: for controlled release (matrix tablets), microencapsulation and raft formation in anti-reflux applications. Provides film forming in filmstrips and can be applied for wound care.
-
VIVAPHARM® ALIGINATES
Calcium Alginate
Tablet disintegration and wound care.
-
VIVAPHARM® ALIGINATES
Alginic Acid
Swelling agent with high water binding capacity, is mainly applied for tablet disintegration.
-
VIVAPHARM® HPMC E15
USP 2910 Methoxy-groups: 28-30% Hydroxpropoxy groups: 7-12%
Viscosity 15 mPa.s. Binder for wet granulation.Grade for an excellent coat
-
VIVAPHARM® HPMC E3
USP 2910 Methoxy-groups: 28-30% Hydroxpropoxy groups: 7-12%
Viscosity 3 mPa.s. For high solid content
VIVAPHARM® HPMC E5
USP 2910 Methoxy-groups: 28-30% Hydroxpropoxy groups: 7-12%
Viscosity 5 mPa.s. Typical grade for an excellent coat.Binder for wet granulation
VIVAPHARM® HPMC E50
USP 2910 Methoxy-groups: 28-30% Hydroxpropoxy groups: 7-12%
Viscosity 50 mPa.s. Suspension stabilizer
-
VIVAPHARM® HPMC E6
USP 2910 Methoxy-groups: 28-30% Hydroxpropoxy groups: 7-12%
Viscosity 6 mPa.s. Typical grade for an excellent coat. Binder for wet granulation
VIVAPHARM® PECTINS
-
Work as a natural thickener, stabilizer, and gelling agent. - Pure citrus pectin - Provides water and moisture control and adhesion - Added to medical products as dietary fiber
-
VIVAPHARM® PVA
-
The most widely used applications are tablet coating and wet granulation.
-
VIVAPHARM® Sugar Spheres
45-60 Mesh
Well established carriers for drugs which are coated around the sugar pellets - Multi unit pellet systems - Consistent and controlled drug release - Multiple drugs combined in one unit - High content uniformity
VIVAPHARM® Sugar Spheres
40-60 Mesh
VIVAPHARM® Sugar Spheres
40-50 Mesh
VIVAPHARM® Sugar Spheres
35-45 Mesh
VIVAPHARM® Sugar Spheres
35-40 Mesh
VIVAPHARM® Sugar Spheres
30-35 Mesh
VIVAPHARM® Sugar Spheres
25-30 Mesh
VIVAPHARM® Sugar Spheres
20-25 Mesh
VIVAPHARM® Sugar Spheres
18-20 Mesh
VIVAPHARM® Sugar Spheres
14-18 Mesh
VIVAPUR® MCC SPHERES 100
70-140 Mesh
Consist purely of microcrystalline cellulose, making them extremely robust and chemically inert. - Water insoluble carrier - For organic solvent free API coating - Small particle sizes available - High robustness
-
VIVAPUR® MCC SPHERES 1000
14-18 Mesh
-
VIVAPUR® MCC SPHERES 200
45-70 Mesh
-
VIVAPUR® MCC SPHERES 350
35-45 Mesh
-
VIVAPUR® MCC SPHERES 500
25-35 Mesh
-
VIVAPUR® MCC SPHERES 700
18-25 Mesh
-
VIVAPUR®101
Particle size:65μm
Fine standard MCC grade, especially suited for wet granulation, roller compaction and spheronization. Very high compactibility.
VIVAPUR®101(Changzhou)
Particle size:65μm
Fine standard MCC grade, especially suited for wet granulation, roller compaction and spheronization. Very high compactibility.
VIVAPUR®102
Particle size:130μm
Medium size standard MCC grade, suited for the majority of directly compressible actives. Combines good flow and high compactibility.
VIVAPUR®102 SCG
Particle size:170/175μm
Coarse, DC-grade MCC.
VIVAPUR®102(Changzhou)
Particle size:130μm
Medium size standard MCC grade, suited for the majority of directly compressible actives. Combines good flow and high compactibility.
VIVAPUR®103
Particle size:65μm
Same quality as grade 101/50M, but very low moisture content (< 1.5 %) for processing water-sensitive actives.
-
VIVAPUR®105
Particle size:15μm
Very fine grade, which gives a pleasant mouth feeling, masks bitter tastes and supports flavors.
VIVAPUR®112
Particle size:130μm
Same quality to grades 102/90M, but very low moisture content (< 1.5 %) for processing water-sensitive actives
VIVAPUR®12
Particle size:180μm
Coarse grade MCC, combines good compactibility and high binding capacity with outstanding flow. Provides good content uniformity at low weight variation – even when used with low concentrations of fine actives.
VIVAPUR®14
Particle size:170μm
Same quality to grade 12, but very low moisture content (<1.5 %) for processing water-sensitive actives
-
VIVAPUR®200
Particle size:250μm
Large size MCC grade with excellent flow properties for a variety of direct compression formulations.
VIVAPUR®200 XLM
Particle size:250μm
Same quality to grades 200/LP200, but very low moisture content (<1.5 %) for processing water-sensitive actives.
-
VIVAPUR®301
Particle size:65μm
Same quality as grade 101, but increased bulk density and improved flow properties.
VIVAPUR®302
Particle size:130μm
Same quality to grades 102/90M, but very low moisture content (< 1.5 %) for processing water-sensitive actives
VIVAPUR®MCG 581 P
NaCMC 8.3-13.8%
Particle Size:>250 µm (60 mesh): max. 0.1%, >75 µm (200 mesh):max. 35%, Viscosity 72-168mPa.s (1.2% solids). For "ready-to-use" suspensions and emulsion prepared with high shear forces.
-
VIVAPUR®MCG 591 P
NaCMC 8.3-13.8%
Particle Size:>250 µm (60 mesh): max. 0.1%, >45 µm (325 mesh):max. 45%, Viscosity 39-91mPa.s (1.2% solids). For "ready-to-use" suspensions and emulsion prepared with high shear forces.
-
VIVAPUR®MCG 611 P
NaCMC 11.3-18.8%
Particle Size:>250 µm (60 mesh): max. 0.1%, >45 µm (325 mesh): max. 50%, Viscosity 50 – 118mPa.s (2.6% solids). For reconstitutable dry suspensions.
-
VIVAPUR®MCG 811 P
NaCMC 11.3-18.8%
Particle Size:>250 µm (60 mesh): max. 3%, Viscosity 2400 – 5600mPa.s (2.6% solids). Highly effective dispersible cellulose grade for a variety of suspensions, emulsions, and spray applications.
-
VIVASOL®
cotton floc
Loss on Drying:max. 10%, Solvent content:max. 1% MeOH. A cellulose-based superdisintegrant, providing excellent results in tablet disintegration. Used at a level of 1 - 4 % only, it is one of the most efficient superdisintegrants in pharmaceutical technology. VIVASOL® can be used in all tableting processes. Especially good for medium soluble actives.
VIVASOL® GF
wood pulp
Loss on Drying:max. 10%, Solvent content:max. 1% EtOH. A cellulose-based superdisintegrant, providing excellent results in tablet disintegration. Used at a level of 1 - 4 % only, it is one of the most efficient superdisintegrants in pharmaceutical technology.
VIVASOL® GF LM
wood pulp
Loss on Drying:max. 6%, Solvent content:max. 1% EtOH. Grade with less than 6 % moisture for food applications (E468).
VIVASTAR® P
MeOH-based
pH 5.5-7.5,GMO Free,Compendial Type A. Superdisintegrant with a rapid and high degree of swelling for tablet and capsule formulations. Especially for poorly water-soluble actives.
VIVASTAR® P 1000 SF
MeOH-based
pH 5.5-7.5,GMO Free,Compendial Type C. Low-/medium-/high-viscosity grade superdisintegrants, forming translucent gels in water. Compliant with Type C of the Ph.Eur. Compliant with Type A of JP and NF.
VIVASTAR® P 3500
MeOH-based
pH 5.5-7.5,GMO Free,Compendial Type C. Low-/medium-/high-viscosity grade superdisintegrants, forming translucent gels in water. Compliant with Type C of the Ph.Eur. Compliant with Type A of JP and NF.
-
VIVASTAR® P 5000
MeOH-based
pH 5.5-7.5,GMO Free,Compendial Type C. Low-/medium-/high-viscosity grade superdisintegrants, forming translucent gels in water. Compliant with Type C of the Ph.Eur. Compliant with Type A of JP and NF.
-
VIVASTAR® PSF
MeOH-based
pH 5.5-7.5,GMO Free,Compendial Type A. Special grade with very low methanol content. Especially suited for alcohol and moisture sensitive actives.
-
Flavor
Sweet flavor: apple flavor, banana flavor, cherry flavor, grape flavor, lemon flavor, cantaloupe flavor, mango flavor, orange flavor, peach flavor, strawberry flavor, tomato flavor, watermelon flavor, pineapple flavor, coconut flavor, cola flavor, chocolate flavor, hawthorn flavor, honey flavor, jasmine flavor, mint flavor, osmanthus flavor, red dates flavor, spearmint flavor, cream flavor, green tea flavor, vanilla flavor, etc.
Flavor
Special flavor: milk fat flavor, super vanill flavor, salty flavor, etc.
Bitterness masking agent
Designed according to the principle of human taste perception, greatly improving patient compliance; Direct mixing and adding, no need to add special processes
Pigment/color lake
Natural colorants: cochineal red, grape skin red, capsicum red, beet red, sorghum red, monascus red, radish red, safflower yellow, gardenia yellow, lutein, riboflavin, natural carotene, β- Carotene, gardenia blue, phyco blue, caramel color, plant carbon black, etc.
Pigment/color lake
Synthetic colorants: lemon yellow, sunset yellow, quinoline yellow, brilliant blue, indigo, allure red, carmine, erythrosine, amaranth, acid red (azorubin), sodium copper chlorophyll, β-carotene, Titanium dioxide, iron oxide red, iron oxide yellow, iron oxide brown, iron oxide black, etc.
Film coating material
Stomach-coated, enteric-coated, moisture-proof, strong shading, strong isolation, etc.
Capsule printing ink
Black, white, red, yellow, blue, green, brown ink, suitable for hollow hard capsule and soft capsule printing
Stardone K25
Molecular mass:28000~34000
Used as a binder, dispersant, thickener in oral preparations
Stardone K30
Molecular mass:44000~54000
Used as a binder, dispersant, thickener in oral preparations
Stardone K90
Molecular mass:1000000~1500000
Used as a binder, thickener in oral preparations
PolyStardone XL
Average particle size:100-120um
As a super disintegrant, it is widely used in oral solid preparations, and there is no gel when disintegrating; as a stabilizer, it can increase the stability of certain drugs, such as vitamins; as a drug carrier, it can be made into a solid dispersion with drugs to solubilize and slow-release effect
PolyStardone XL-10
Average particle size:25-35um
As a super disintegrant, it is widely used in oral solid preparations, and there is no gel when disintegrating; as a stabilizer, it can increase the stability of certain drugs, such as vitamins; as a drug carrier, it can be made into a solid dispersion with drugs to solubilize and slow-release effect
PolyStardone M
Average particle size:8-18um
As a super disintegrant, it is widely used in oral solid preparations, and there is no gel when disintegrating; as a stabilizer, it can increase the stability of certain drugs, such as vitamins; as a drug carrier, it can be made into a solid dispersion with drugs to solubilize and slow-release effect
PolyStardone XL Ultra
Average particle size:100-120um
As a super disintegrant, it is widely used in oral solid preparations, and there is no gel when disintegrating; as a stabilizer, it can increase the stability of certain drugs, such as vitamins; as a drug carrier, it can be made into a solid dispersion with drugs to solubilize and slow-release effect
PolyStardone XL-10 Ultra
Average particle size:25-35um
As a super disintegrant, it is widely used in oral solid preparations, and there is no gel when disintegrating; as a stabilizer, it can increase the stability of certain drugs, such as vitamins; as a drug carrier, it can be made into a solid dispersion with drugs to solubilize and slow-release effect
Stardone VA64
Molecular mass:45000~54000
High-quality direct pressure adhesive with good compressibility and plasticity, and can also be used in dry and wet granulation processes; high-quality film-forming agent for drug coating, softer film formation and less moisture absorption; high-quality drug carrier,it's suitable for the preparation of solid dispersions by hot melt extrusion process and improves the bioavailability of insoluble drugs.
Povidone lodine
High-quality disinfectants used in surgical operations and skin disinfection; Prevent infection in the fields of oral cavity, skin, gynecology, etc.; disinfection of household furniture, appliances, hotels, and hotels; food industry, aquaculture and animal disinfection. 。
mannitol
M100/M200
Super large specific surface area, rapid disintegration and dissolution, high drug loading, very low reducing sugar content, excellent fluidity and compressibility. It is suitable for direct compression, especially for low dose and micro-powder direct compression
Delta mannitol
Delta
The only commercialized Delta crystal in the world (90% of Delta crystal), excellent adhesion and compressibility, rapid disintegration, and large increase in specific surface area after granulation. Suitable for wet granulation, especially challenging wet granulation formulation
sorbitol
SI1400/1450
Excellent compressibility, high adsorption capacity, low hygroscopicity, good fluidity and excellent taste. Suitable for direct compression, chewable tablets, effervescent tablets, buccal tablets, sublingual tablets and syrups, etc.
sorbitol
SI150
Excellent compressibility, high adsorption capacity, low hygroscopicity, good fluidity and excellent taste. Suitable for direct compression, chewable tablets, effervescent tablets, buccal tablets, sublingual tablets and syrups, etc.
anhydrous Calcium hydrogen phosphate
spray drying
Low microbial content and spray drying process have good Compressibility and fluidity, low hygroscopicity and good stability. Suitable for wet granulation, dry granulation and direct compression, in accordance with EP, BP, USP, FCC
Exempted from registration
anhydrous Calcium hydrogen phosphate
Item number:102144
superfine pow(<250mesh). Suitable for wet granulation, dry granulation and direct compression, in accordance with EP, BP, USP, FCC
Exempted from registration
calcium carbonate precipitated(≦0.002% Fe)
Item number:102064
Very low iron content (more suitable for drugs containing phenolic hydroxyl group), very low heavy metal content and good stability. Buffers, dissolution AIDS and shading agents in dispersible tablets
Exempted from registration
calcium sulfate dihydrate precipitated
Item number:102160
EP,BP
Exempted from registration
calcium carbonate precipitated
Item number:102069
EP,USP,BP,FCC
Exempted from registration
sucrose
Item number:107653
EP,NF,JP,BP
D(+)-glucose monohydrate
Item number:108346
EP,USP,BP
Magnesium hydroxide carbonate
Item number:102440
EP,USP,BP
gelatin
Item number:104078
EP,NF,BP
gum arabic
Item number:104228
spray drying. EP,BP
D(-)- mannitol low in endotoxins
Item number:104228
Very low endotoxin content (< 1 I.U/g) and low microbial content. Dry Powder Inhalant Carrier
Polyvinyl alcohol
4/5/8/18/26/28-88
Strict control of endotoxin, microorganism, residual solvents and Butylene aldehyde is of higher safety. Suitable for oral dosage forms such as coating and sustained release,external dosage forms such as transdermal membranes and plastics, ophthalmic dosage forms and biodegradable medical supplies. EP,USP,JPE
Polyvinyl alcohol
40-88
Strict control of endotoxin, microorganism, residual solvents and Butylene aldehyde is of higher safety. Suitable for oral dosage forms such as coating and sustained release,external dosage forms such as transdermal membranes and plastics, ophthalmic dosage forms and biodegradable medical supplies. EP,USP,JPE
sucrose
Item number:107653
EP,NF,JP,BP
Exempted from registration
sucralose powder
Item number:100894
The only sweetener from sucrose is similar to sucrose in taste, 600 times sweetness of sucrose, insensitive to temperature and PH, inertia and stable between batches. Suitable for diabetes, fructose intolerance, pregnant women and children. chewable tablets, buccal tablets, orally disintegrating tablets, effervescent tablets, oral liquid and syrup, etc.
Exempted from registration
D(+)-glucose monohydrate
Item number:108346
EP,USP,BP
Exempted from registration
D(-)-fructose
Item number:105321
EP,USP,FCC, BP
Exempted from registration
sorbitol liqiud(syrup,crystallizing)
Item number:102994
EP,USP,BP
Exempted from registration
(-)-menthol cryst
Item number:105995
EP,USP,BP
Exempted from registration
meglumine
Item number:106143
The strictest quality requirements in the world , in purity, residual solvents, bacterial endotoxin, heavy metal impurities and other indicators are significantly better than similar products. Stabilizer, used to balance ions, improve drug dissolution and bioavailability, EP, USP, JP
mannitol
Item number:137096
Very low endotoxin content (< 1 I.U/g) and low microbial content. Protective agents of macromolecules and chemicals (lyophilized preparations), osmotic pressure regulators of ophthalmic preparations, and transfusions as osmotic pressure therapeutics for treating renal failure and diuretics
sucrose
Item number:100892
Control of low endotoxin < 2.0 I.U/g. Preferred high-risk preparations
tris(hydroxymethyl)aminomethane(trometamol)
Item number:108386
Endotoxin ≤0.03 I.U/g
histidine
Item number:104352
Endotoxin ≤ 2.0 I.U/g
ethanolamine
Item number:137044
Endotoxin ≤ 2.5 I.U/g
ethanol 96%
Item number:100971
Endotoxin ≤ 2.5 I.U/g
sodium caprylate
Item number:817081
Endotoxin ≤20 I.U/g
Aspartate
Item number:101565
Endotoxin ≤ 3.0 I.U/g
sodium hydrogen carbonate
Item number:137013
Endotoxin ≤ 2.5 I.U/g
Exempted from registration
Sodium carbonate (anhydrous)
Item number:137014
Endotoxin ≤ 2.5 I.U/g
Exempted from registration
serine
Item number:107647
Endotoxin ≤ 2.0 I.U/g
tert-butyl alcohol
Item number:61983225001730IN
Endotoxin ≤ 0.25 I.U/g
sorbital 400
Item number:111597
Endotoxin ≤1.0 I.U/g
tryptophan
Item number:108396
Endotoxin ≤10 I.U/g
triethanolamine
Item number:137022
Endotoxin ≤2.5 I.U/g
sodium-(S)-lactate-solution
Item number:106522
Endotoxin ≤5 I.U/g
Exempted from registration
S-lactic acid
Item number:100366
Endotoxin ≤5 I.U/g
Exempted from registration
sodium hydroxide
Item number:137020
Endotoxin ≤2.5 I.U/g
Exempted from registration
hydroxypropyl beta cyclodextrin
Item number:142020
Endotoxin ≤10 I.U/g
D(+)-glucose monohydrate
Item number:108346
Endotoxin ≤2.5 I.U/g
D(+)-glucose anhydrate
Item number:137048
Endotoxin ≤2.5 I.U/g
tri-sodium citrate dihydrate cryst
Item number:137042
Endotoxin ≤2.5 I.U/g
Exempted from registration
citric acid monohydrate
powder/cryst
Endotoxin<0.5 I.U/g
Exempted from registration
citric acid anhydrate
powder/fine-granular
Endotoxin<0.5 I.U/g
Exempted from registration
urea
Item number:137030
Endotoxin ≤3.0 I.U/g
sodium chloride(api)
Item number:106444
Endotoxin ≤2.5 I.U/g
Exempted from registration
sodium chloride
Item number:116224
Endotoxin ≤2.5 I.U/g
Exempted from registration
magnesium chloride heanhydrate
Item number:105832
Endotoxin ≤3.0 I.U/g. Suitable for high-risk preparations
Exempted from registration
potassium chloride
Item number:100320
Endotoxin ≤5.0 I.U/g. Suitable for high-risk preparations
Exempted from registration
calcium chloride dihydrate
Item number:102465
Endotoxin ≤3.0 I.U/g
Exempted from registration
ammonium sulfate
Item number:128218
Endotoxin ≤2.5 I.U/g
sulfuric acid(10%)
Item number:480704
Endotoxin ≤2.5 I.U/g
Exempted from registration
disodium hydrogen phosphate
Item number:137036
Endotoxin ≤2.5 I.U/g
Exempted from registration
dipotassium hydrogen phosphate(low sodium)
Item number:109828
Endotoxin ≤1.1 I.U/g
Exempted from registration
disodium hydrogen phosphate(monohydrate)
Item number:106349
Endotoxin ≤2.5 I.U/g
Exempted from registration
disodium hydrogen phosphate(dihydrate)
Item number:137018
Endotoxin ≤2.5 I.U/g
Exempted from registration
dipotassium hydrogen phosphate
Item number:137039
Endotoxin ≤2.5 I.U/g
Exempted from registration
leucine
Item number:105020
Endotoxin ≤3.0 I.U/g
Lysine hydrochloride
Item number:105701
Endotoxin ≤3.0 I.U/g
Polyvinyl alcohol
4/5/8/18/26/28-88
Endotoxin ≤0.03 I.U/g
Polyvinyl alcohol
40-88
Endotoxin ≤0.03 I.U/g
Polyethylene glycol octyl phenyl ether
Item number:108643
Endotoxin ≤100 I.U/g
PLGA
many models
EP,USP
Arginine hydrochloride
Item number:101544
Endotoxin ≤3.0 I.U/g
Arginine
Item number:101587
Endotoxin ≤2.0 I.U/g
glutamate
Item number:100286
Endotoxin ≤2.0 I.U/g
glycine
Item number:100590
Endotoxin ≤3.0 I.U/g
cocarboxylase chloride thiamine diphosphoric acid ester chloride
Item number:500112
Endotoxin ≤12 I.U/g
cocarboxylase tetrahydrate
Item number:500111
Endotoxin ≤12 I.U/g
sodium acetate anhydrous
Item number:137046
Endotoxin ≤2.5 I.U/g
Exempted from registration
sodium acetate trihydrate
Item number:137012
Endotoxin ≤2.5 I.U/g
Exempted from registration
alanine
Item number:101700
Endotoxin ≤2.0 I.U/g
Exempted from registration
Glacial acetic acid
Item number:137000
Endotoxin ≤2.5 I.U/g
Exempted from registration
benzalcohol
Item number:100987
Endotoxin ≤2.5 I.U/g
Phenylalanine
Item number:107267
Endotoxin ≤3.0 I.U/g
cysteine
Item number:102735
Endotoxin ≤6.0 I.U/g
ammonia
Item number:480905
Endotoxin ≤2.5 I.U/g
Exempted from registration
Tris(hydroxymethyl)aminomethane hydrochloride
Item number:108219
Endotoxin ≤2.5 I.U/g
N-Acetyl-DL-tryptophan
Item number:112488
Endotoxin ≤50 I.U/g
D-calcium sucrose
Item number:102148
Endotoxin ≤100 I.U/g
Ammonium trimethyl chloride
Item number:CH2900014
Endotoxin ≤0.4E.U/g
meglumine
Item number:106143
The strictest quality requirements in the world , in purity, residual solvents, bacterial endotoxin, heavy metal impurities and other indicators are significantly better than similar products. Stabilizer, used to balance ions, improve drug dissolution and bioavailability, EP, USP, JP
isopropyl alcohol
Item number:100967
EP, BP
ethyl acetate
Item number:100864
EP, BP
diethyl ether
Item number:100926
EP, BP
ethanol absolute
Item number:100986
EP,USP,BP,JP
ethanol 96%
Item number:100967
EP,USP,JP
tween
I20/60/80
EP,NF,JP
tert-butyl alcohol
Item number:61983225001730IN
Endotoxin ≤ 0.25 I.U/g
Cetyl alcohol
Item number:1009889
EP,BP,JP,NF
sodium dodecyl sulfonate
Item number:817034
EP
glutin
Item number:104078
EP,BP,NF
Polyvinyl alcohol
4/5/8/18/26/28-88
EP,USP,JP
Polyvinyl alcohol
40-88
EP,USP,JP
cetylesters wax
Item number:115419
EP,NF
glycerol anhydrous
Item number:104093
EP,USP,BP,JP
cholesterol
Item number:103672
EP,BP,JP,NF
poloxamer 188
Item number:137065
EP,NF
acetone
Item number:100013
EP,BP,JP,NF
1,2-propanediol
Item number:107478
EP,USP,BP
gum arabic
Item number:104228
EP,BP
SLC 500
Item number:120091
The specific surface area is large and can improve the bioavailability of insoluble drugs. EP,USP
calcium titriplex dihydrate
Item number:108439
EP,USP,BP
ethylenedinitrilotetraacetic acid disodium salt dihydrate
Item number:108421
EP,USP,BP,JP
titanium oxide
Item number:100805
EP,USP,JP
tween
many models
EP,JP,NF
sodium dodecyl sulfonate
Item number:817034
EP
triacetin
Item number:103000
EP,USP,BP
Isopropyl myristate
Item number:817066
EP,NF
Triethyl citrate
Item number:817059
EP,JP,NF
glutin
Item number:104078
EP,BP,NF
Dibutyl sebacate
Item number:817067
NF
Polyvinyl alcohol
4/5/8/18/26/28-88
EP,USP,JP
Polyvinyl alcohol
40-88
EP,USP,JP
Polyethylene glycol
many models
EP
lub talc
Item number:108070
EP,USP,BP,JP
glycerol anhydrous
Item number:104093
EP,USP,BP,JP
1,2-propanediol
Item number:107478
EP,USP,BP
Wax white in pastilles
Item number:111544
EP,BP
gum arabic
Item number:104228
EP,BP
lub talc
Item number:108070
EP,USP,BP,JP
stearicacid
Item number:100661
EP,USP,BP,JP
Calcium stearate
Item number:100664
EP,USP,BP,JP
LUB MST
Item number:100663
EP,USP,BP,JP
formic acid
Item number:100263
EP
Exempted from registration
Hydrochloric acid fuming 37%
Item number:137007
Endotoxin ≤2.5 I.U/g
Exempted from registration
Magnesium hydroxide carbonate
Item number:102440
EP,USP,BP
Exempted from registration
Sodium Hydrogen Carbonate
Item number:102374
45mesh~70mesh granulation. EP,USP,BP,JP
Exempted from registration
sodium carbonate (anhydrous)
Item number:106398
EP,USP,JP
Exempted from registration
potassium carbonate
Item number:104924
EP,USP
Exempted from registration
Calcium carbonate
Item number:102069
EP,USP,BP
Exempted from registration
lactic acid
Item number:100366
EP,BP
Exempted from registration
sodium hydroxide
Item number:106482
EP,USP,BP,JP
Exempted from registration
Calcium hydroxide
Item number:102119
USP
Exempted from registration
D(+)-Glucose monohydrate
Item number:108346
EP,USP,BP
Exempted from registration
DL-Malic acid
Item number:100383
EP,NF
Exempted from registration
Boric acid
Item number:100162
EP,BP,NF
Exempted from registration
sodium citrate
Item number:anhydrous/dihydrate
EP,BP,NF
Exempted from registration
citric acid monohydrate
powder/cryst
EP,USP,BP,JP
Exempted from registration
citric acid anhydrate
powder/granular
EP,USP,BP,JP
Exempted from registration
sodium chloride
Item number:106400
EP,USP,BP
Exempted from registration
potassium chloride
Item number:104935
EP,USP,BP
Exempted from registration
calcium chloride dihydrate
Item number:142000
EP,USP,BP,JP
Exempted from registration
Magnesium sulfate heptahydrate
Item number:105882
EP
Exempted from registration
sulphuric acid
Item number:100713
EP,BP,NF
Exempted from registration
tri-Sodium phosphate dodecahydrate
Item number:106577
NF
Exempted from registration
di-Sodium hydrogen phosphate
Item number:106585
EP,USP,BP
Exempted from registration
di-potassium hydrogen phosphate anhydrous,low in sodium
Item number:109828
EP,USP,BP
Exempted from registration
di-Ammonium hydrogen phosphate
Item number:101206
NF
Exempted from registration
Sodium dihydrogen phosphate dihydrate
Item number:106345
EP,USP,BP,JP
Exempted from registration
Potassium dihydrogen phosphate
Item number:104871
EP,BP,NF
Exempted from registration
ammonim dihydrogen phosphate cryst
Item number:101124
EP
Exempted from registration
ortho-Phosphoric acid 85%
Item number:100563
EP,NF,BP,JP
Exempted from registration
L(+)-Tartaric acid
Item number:100803
EP,NF,BP,JP
Exempted from registration
Adipic acid
Item number:100090
EP,NF
Exempted from registration
Sodium acetate trihydrate
Item number:106265
EP,USP,BP
Exempted from registration
Acetic acid 96%
Item number:100058
EP
Exempted from registration
Acetic acid (glacial) 100%
Item number:100056
EP,USP,BP,JP
Exempted from registration
Ammonia solution 25%
Item number:105422
EP,BP
Exempted from registration
N-Acetyl-DL-tryptophan
Item number:112488
EP,BP
L-Histidine monohydrochloride monohydrate
Item number:104354
EP,USP
L-Histidine
Item number:104352
EP,USP
L-Isoleucine
Item number:105357
EP,USP
L-Aspartic acid
Item number:100129
EP,USP,BP
L-Asparagine monohydrate
Item number:101565
EP
L-Serine
Item number:107647
EP,USP
L-Tryptophan
Item number:108396
EP,USP,BP
L-Proline
Item number:107430
EP,USP
L-Leucine
Item number:105020
EP,USP
L-Tyrosine
Item number:108378
EP,USP
L-Lysine monohydrochloride
Item number:105701
EP,USP,BP
L-Arginine monohydrochloride
Item number:101544
EP,USP,BP
L-Arginine
Item number:101587
EP,USP
L-Cystine
Item number:102737
EP
L-Glutamine
Item number:100286
USP
L-Glutamic acid
Item number:101791
EP,USP
L-Alanine
Item number:101700
EP,USP
L-Cysteine hydrochloride monohydrate
Item number:102735
EP,USP
Phenol
Item number:100201
EP,USP,JP
all-rac-α-Tocopheryl acetate
Item number:500952
EP,USP,BP
ethylenedinitrilotetraacetic acid disodium salt dihydrate
Item number:137004
EP,USP,BP,JP,ACS
Titriplex® III (ethylenedinitrilotetraacetic acid disodium salt dihydrate)
Item number:108421
EP,USP,BP,JP
Sodium sulfite
Item number:106652
EP,NF,BP
Vitamin E
Item number:500862
USP
all-rac-α-Tocopherol
Item number:500949
EP
thymol cryst
Item number:108167
EP,NF,BP
potassium sorbate
powder/granules
EP,NF,BP
Sorbic acid
Item number:100662
EP,NF,BP
Propyl 4-hydroxybenzoate sodium salt
Item number:107428
EP,NF,BP,JP
Propyl 4-hydroxybenzoate
Item number:107427
EP,NF,BP,JP
thimerosal
Item number:817043
EP,BP
Sodium thiosulfate pentahydrate
Item number:106514
EP,USP,BP
L(+)Ascorbyl palmitate
Item number:500090
EP,NF,BP
Sodium disulfite
Item number:106357
EP,NF,BP,JP
Methyl 4-hydroxybenzoate sodium salt
Item number:106756
EP,NF,BP
Methyl 4-hydroxybenzoate
Item number:106757
EP,USP,BP,JP
Butylhydroxytoluene
Item number:817074
EP,NF,JP
Butylhydroxyanisole
Item number:817023
EP,NF
Benzalkonium chloride(50%)
Item number:817046
EP,NF
Benzalkonium chloride
Item number:817032
EP
Sodium benzoate
Item number:106290
EP,NF,BP
Benzyl benzoate
Item number:101806
EP,USP,BP
Benzyl alcohol
Item number:100981
EP,NF,BP,JP
Ethyl 4-hydroxybenzoate sodium salt
Item number:100886
EP
Ethyl 4-hydroxybenzoate
Item number:100887
EP,NF,BP,JP
Sucrose(Very low endotoxin)
Item number:103789
EP,ChP,JP,NF
Zinc acetate dihydrate
Item number:108800
EP,USP
Sodium chloride
Item number:137017
EP,BP,ChP,JP,USP
Benzyl Alcohol
Item number:137120
EP,ChP,JP,NF
Parteck SRP 80
Item number:141439
EP,ChP,USP,JPE
Parteck MXP
Item number:141464
EP,JPE,USP
Zinc chloride
Item number:108915
EP,BP,JP,USP
Glycine granulated
Item number:103669
EP,BP,ChP,JP,USP
Trehalose dihydrate
Item number:102776
EP,ChP,NF,JP
Succinic acid cryst
Item number:100681
ChP,NF,JPE,ACS
Zinc oxide
Item number:108846
EP,BP,JP,USP
Tablettose 100
agglomerated lactose
Hausner factor: 1.24 Carrs index: 19.44 % Very good flowability Very good compactability Low hygroscopicity Excellent stability Superior blending characteristics Fast disintegration times
Tablettose 70
agglomerated lactose
Hausner factor: 1.21 Carrs index: 17.19 % Very good flowability Very good compactability Low hygroscopicity Excellent stability Superior blending characteristics Fast disintegration times
Tablettose 80
agglomerated lactose
Hausner factor: 1.24 Carrs index: 19.48 % Very good flowability Very good compactability Low hygroscopicity Excellent stability Superior blending characteristics Fast disintegration times
DuraLac H
anhydrous lactose
Hausner factor: 1.31 Carrs index: 23.86 % Excellent compactability Good flowability Relatively low hygroscopicity High storage stability Suitable for formulations requiring low water conten
DuraLac M
anhydrous lactose
Cellactose80
co-processed lactose
Hausner factor: 1.32 Carrs index: 24.49 % Good content uniformity due to low segregation tendency of the active ingredient Smooth surface of the resulting cores for easy and economical coating Compaction of delicate active ingredients due to excellent compactability Consistent tablet hardness through constant lactose/cellulose ratio High weight consistency at all compaction speeds
Combilac
co-processed lactose
Hausner factor: 1.19 Carrs index: 16 % Excellent compactability Excellent flowability Fast, hardness-independent tablet disintegration for effective API release Low friability Overcoming individual ingredient compacting and handling limitations
MicroceLac 100
co-processed lactose
Hausner factor: 1.26 Carrs index: 20.69 % Good content uniformity due to low segregation tendency of the active ingredient Smooth surface of the resulting cores for easy and economical coating Compaction of delicate active ingredients due to excellent compactability Consistent tablet hardness due to constant lactose/cellulose ratio High weight consistency at various tabletting speed.
RetaLac
co-processed lactose
Hausner factor: 1.35 Carrs index: 26.09 % Direct compression of modified release formulations Superior processibility compared to corresponding wet granulated and physical admixture of parent ingredients Meets compendial requirements Drug release kinetics are predominantly controlled by pure diffusion Unaffected by acidic conditions (between pH 1 and 7) Dissolution can be quit
StarLac
co-processed lactose
Hausner factor: 1.24 Carrs index: 19.4 % Excellent flowability, Fast disintegration of final tablets Disintegration of final tablets independent from tablet hardness Disintegration of final tablets independent from lubricant level
GranuLac 140
milled lactose
Hausner factor: 1.41 Carrs index: 29.21 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
GranuLac 200
milled lactose
Hausner factor: 1.55 Carrs index: 35.37 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
GranuLac 230
milled lactose
Hausner factor: 1.65 Carrs index: 39.47 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
GranuLac 70
milled lactose
Hausner factor: 1.28 Carrs index: 21.98 % Good compactability, Narrow particle size distribution Good blending properties High storage stabilit High batch-to-batch consistency
InhaLac 400
milled lactose
Hausner factor: 1.61 Carrs index: 38 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 500
milled lactose
Hausner factor: 1.54 Carrs index: 35 % Highly controlled powder characteristics Highest microbial quality including endotoxines A broad spectrum of different sizes ranges Tailor-made inhalation grades Customized product specifications
SorboLac 400
milled lactose
Hausner factor: 1.79 Carrs index: 44.07 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
CapsuLac 60
sieved lactose
Hausner factor: 1.23 Carrs index: 18.57 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
InhaLac 120
sieved lactose
Hausner factor: 1.15 Carrs index: 13 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 160
sieved lactose
Hausner factor: 1.19 Carrs index: 16 % Dedicated production process Highly controlled powder characteristics Highest microbial quality including low endotoxins Retests after 24 months
InhaLac 230
sieved lactose
Hausner factor: 1.21 Carrs index: 18 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 250
sieved lactose
Hausner factor: 1.21 Carrs index: 18 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 70
sieved lactose
Hausner factor: 1.18 Carrs index: 15 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
PrismaLac 40
sieved lactose
Hausner factor: 1.23 Carrs index: 18.52 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
SacheLac 80
sieved lactose
Hausner factor: 1.25 Carrs index: 19.72 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
SpheroLac 100
sieved lactose
Hausner factor: 1.26 Carrs index: 20.69 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
Low Endotoxin
sieved lactose
Bacterial endotoxin is controlled below 5EU/g
FlowLac 100
spray-dried lactose
Hausner factor: 1.2 Carrs index: 16.9 % Superior flowability Excellent compactability Low hygroscopicity and high stability Fast disintegration times
FlowLac 90
spray-dried lactose
Hausner factor: 1.2 Carrs index: 16.42 % Superior flowability Excellent compactability Low hygroscopicity and high stability Fast disintegration times
DEXOLVE™
Sulfobutyl-ether-beta cycodextrin
• Significant solubility enhancement (10 to 100,000 fold) • Improvement of chemical stability • Increased bioavailability, facilitated delivery • Reduced aggregation • Moderate irritation or reduced side-effects • Maximized patient safety, complete r
Silica
350FCP/770FCP/320
· Improvement of free-flow ability · Improvement of tablet hardness · Powderization of liquid material · Precise viscosity control · Control of sustained release · Improvement of solubility for poorly soluble material · Design of oral disintegrating
METHOCELTM VLV Premium
VLV Premium
Viscosity:2.3-3.3cP(2% in [email protected]℃) The polymer helps to increase solid loading in a solution without building solution viscosity.
CARBOWAX™ SENTRY™ PEG 300
PEG 300
Liquid
CARBOWAX™ SENTRY™ PEG 400
PEG 400
Liquid
CARBOWAX™ SENTRY™ PEG 400 Low Aldehyde
PEG 400
Liquid
CARBOWAX™ SENTRY™ PEG 540 Blend
PEG 540
Soft Solid
CARBOWAX™ SENTRY™ PEG 600
PEG 600
Liquid
CARBOWAX™ SENTRY™ PEG 600 Low Aldehyde
PEG 600
Liquid to Semisolid
CARBOWAX™ SENTRY™ PEG 1000
PEG 1000
Soft Solid
CARBOWAX™ SENTRY™ PEG 1450
PEG 1450
Waxy solid (Flake)
CARBOWAX™ SENTRY™ PEG 3350 Inhibited
PEG 3350
Waxy solid
CARBOWAX™ SENTRY™ PEG 4000 Inhibited
PEG 4000
Waxy Solid
CARBOWAX™ SENTRY™ PEG 4600
PEG 4600
Granular or Molten(Contains BHT, 100 ppm nominal)
CARBOWAX™ SENTRY™ PEG 8000
PEG 8000
Solid
in process
StarLac
co-processed lactose
Hausner factor: 1.24 Carrs index: 19.4 % Excellent flowability, Fast disintegration of final tablets Disintegration of final tablets independent from tablet hardness Disintegration of final tablets independent from lubricant level
combilac
co-processed lactose
Hausner factor: 1.19 Carrs index: 16 % Excellent compactability Excellent flowability Fast, hardness-independent tablet disintegration for effective API release Low friability Overcoming individual ingredient compacting and handling limitations
RetaLac
co-processed lactose
Hausner factor: 1.35 Carrs index: 26.09 % Direct compression of modified release formulations Superior processibility compared to corresponding wet granulated and physical admixture of parent ingredients Meets compendial requirements Drug release kinetics are predominantly controlled by pure diffusion Unaffected by acidic conditions (between pH 1 and 7) Dissolution can be quit
DuraLac M
anhydrous lactose
DuraLac H
anhydrous lactose
Hausner factor: 1.31 Carrs index: 23.86 % Excellent compactability Good flowability Relatively low hygroscopicity High storage stability Suitable for formulations requiring low water conten
Tablettose 80
agglomerated lactose
Hausner factor: 1.24 Carrs index: 19.48 % Very good flowability Very good compactability Low hygroscopicity Excellent stability Superior blending characteristics Fast disintegration times
Tablettose 100
agglomerated lactose
Hausner factor: 1.24 Carrs index: 19.44 % Very good flowability Very good compactability Low hygroscopicity Excellent stability Superior blending characteristics Fast disintegration times
FlowLac 90
spray-dried lactose
Hausner factor: 1.2 Carrs index: 16.42 % Superior flowability Excellent compactability Low hygroscopicity and high stability Fast disintegration times
FlowLac 100
spray-dried lactose
Hausner factor: 1.2 Carrs index: 16.9 % Superior flowability Excellent compactability Low hygroscopicity and high stability Fast disintegration times
Cellactose80
co-processed lactose
Hausner factor: 1.32 Carrs index: 24.49 % Good content uniformity due to low segregation tendency of the active ingredient Smooth surface of the resulting cores for easy and economical coating Compaction of delicate active ingredients due to excellent compactability Consistent tablet hardness through constant lactose/cellulose ratio High weight consistency at all compaction speeds
MicroceLac 100
co-processed lactose
Hausner factor: 1.26 Carrs index: 20.69 % Good content uniformity due to low segregation tendency of the active ingredient Smooth surface of the resulting cores for easy and economical coating Compaction of delicate active ingredients due to excellent compactability Consistent tablet hardness due to constant lactose/cellulose ratio High weight consistency at various tabletting speed.
GranuLac 70
milled lactose
Hausner factor: 1.28 Carrs index: 21.98 % Good compactability, Narrow particle size distribution Good blending properties High storage stabilit High batch-to-batch consistency
GranuLac 140
milled lactose
Hausner factor: 1.41 Carrs index: 29.21 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
GranuLac 200
milled lactose
Hausner factor: 1.55 Carrs index: 35.37 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
GranuLac 230
milled lactose
Hausner factor: 1.65 Carrs index: 39.47 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
SorboLac 400
milled lactose
Hausner factor: 1.79 Carrs index: 44.07 % Good compactability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
Tablettose 70
agglomerated lactose
Hausner factor: 1.21 Carrs index: 17.19 % Very good flowability Very good compactability Low hygroscopicity Excellent stability Superior blending characteristics Fast disintegration times
CapsuLac 60
sieved lactose
Hausner factor: 1.23 Carrs index: 18.57 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
SacheLac 80
sieved lactose
Hausner factor: 1.25 Carrs index: 19.72 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
SpheroLac 100
sieved lactose
Hausner factor: 1.26 Carrs index: 20.69 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
InhaLac 70
sieved lactose
Hausner factor: 1.18 Carrs index: 15 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 120
sieved lactose
Hausner factor: 1.15 Carrs index: 13 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 160
sieved lactose
Hausner factor: 1.19 Carrs index: 16 % Dedicated production process Highly controlled powder characteristics Highest microbial quality including low endotoxins Retests after 24 months
InhaLac 230
sieved lactose
Hausner factor: 1.21 Carrs index: 18 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 250
sieved lactose
Hausner factor: 1.21 Carrs index: 18 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 400
milled lactose
Hausner factor: 1.61 Carrs index: 38 % Dedicated production process Tailor-made products with specific powder characteristics Highest microbial quality including low endotoxins Available in a broad spectrum of sieve cuts to meet your criteria
InhaLac 500
milled lactose
Hausner factor: 1.54 Carrs index: 35 % Highly controlled powder characteristics Highest microbial quality including endotoxines A broad spectrum of different sizes ranges Tailor-made inhalation grades Customized product specifications
PrismaLac 40
sieved lactose
Hausner factor: 1.23 Carrs index: 18.52 % Excellent flowability Narrow particle size distribution Good blending properties High storage stability High batch-to-batch consistency
Back List
  • Service Hotline 400-8828-621

    Wechat
    Get the latest news

COMPANY
About us
Milestones
Our value
Awards & qualifications
PIDI Standard
NEWS
Exhibitions & Seminars
Company News
Industry dynamics
PRODUCTS
Partners
Applications
APIs
SERVICES

Scan by Wechat
for free samples